Pack Leader ELF-50, Operation Manual, Page: 23 / 80

| 23
TROUBLE SHOOTING
PROBLEM 7: WRINKLES OR BUBBLE OCCUR WHEN LABELED
A. LABEL COMES OUT TOO EARLY
1. Move the object sensor left to an appropriate position to test labeling. If the label still comes out too
early, move to step 2.
2. Increase the value of the label peel delay in LABELING MODE menu.
B. THE POSITION OF LABEL IS NOT ACCURATE
1. Check whether the front of the dispensing plate is square.
2. The label sensor is in an unusual position. Please inspect the label sensor or replace with a new one.
3. The gap between the labels are not consistent.
C. BOTTLE CONDITION
1. Surface of product is not consistent.
D. BACK PRESSURE PLATE
1. Back pressure plate is too tight
PROBLEM 8: CONVEYOR DOES NOT WORK
A. WILL NOT RESPOND ON THE TOUCH SCREEN
1. Please re-start the machine.
2. After restarting the machine, if the conveyor still does not work contact
Pack Leader USA
.
B. CONVEYOR MOTOR
1. Gearwheel belt is damaged or loose.
2. Check wires for damage.