CLEANING THE VACUUM FILTER
6.
Lift the cover
7. Take off the vacuum cover by rotating it counter clockwise
8. Remove the filter and its housing
9. Use clear water to clean the walls and the bottom of the filter
10. Remove the filter and its housing
11. Wash all components thoroughly
12. Reassemble repeating the above operations in reverse
CLEANING THE SQUEEGEE
To obtain the best drying results, keep the squeegee clean.
To clean the squeegee it is
necessary to:
13. Remove the vacuum hose from the squeegee
14. Lift locking latches. Remove the squeegee assembly by pulling rearward
15. Clean the inside of the squeegee thoroughly
16. Clean the squeegee blades thoroughly
17. Reassemble
REPLACING THE SQUEEGEE BLADES
Check the squeegee blades for wear and if necessary, change them.
To replace the
squeegee blades:
18. Remove the squeegee vacuum hose from its port
19. Lift locking latches and pull squeegee assembly rearward
20. Release the band clamps by lifting the band clamp latch
21. Remove squeegee blades
22. Rotate or replace the blades. Please note that the squeegee has 4 useable edges so
you may be able to rotate squeegee blades
23.
To reassemble the squeegee, repeat the above operations in reverse
DAILY MACHINE MAINTENANCE
Summary of Contents for Z210T
Page 34: ...34 WIRING DIAGRAM DRAWING 10...