Pacific WDV-18, Parts & Operating Manual

Page: 9 / 10

9
1. Position the machine on a level surface.
2. Unlock the lower squeegee lift arm weldment (11).
3. Align the squeegee with the lift arm weldment; using the shoulder screws (5) on the back side of the lift arm
weldment, place the jam nuts (4) between the arm weldment and squeegee and then screw the knobs (6) on
the front of the squeegee assembly. Leave the hardware slightly loose.
4. Position the squeegee assembly to assure that it sits flat from side to side level with the surface. Then tighten
the knobs.
5. Connect the vacuum hose assembly, Items 17, 18 and 19 to the tank adaptor and squeegee adaptor.
6. Adjust the squeegee height by rotating the screw (27) clockwise to lower the squeegee and counterclockwise
to raise the squeegee.
ITEM PART NO. DESCRIPTION QTY. ITEM PART NO. DESCRIPTION QTY.
1 960008 Bolt, Shoulder 2 15 960007 Bolt, Shoulder, 3/8x1/2 Lg 2
2 609703 Wheel 2 16 600806 Bracket, Arm Support 2
3 608506 Squeegee Channel Weldment 1 17 600205 Adaptor, Hose 1
4 920019 Nut, 1/4-20 Hex Jam 3 18 604106 Hose, Vacuum 1
5 962010 Screw, 1/4-20x1 HHCS 2 19 600206 Adaptor, Hose 1
6 A13018 Knob 2 20 920012 Nut, 5/16-18 ESNA Lock 4
7 W506D Screw,5/16-18x3/4 HH MS 6 21 962015 Screw, 10-32x3/8 Pan Hd 2
8 W380D Screw, 10-32x3/4 PHP 16 22 608507 Support, Lock Backup 1
9 607209 Retainer-Squeegee Blade 2 23 605102 Lock, Squeegee Spring 1
10 600705 Blade, 28" Squeegee 2 24 608201 Spacer, Squeegee Support 2
11 600301 Arm Weldment-Squeegee 1 25 608512 Stop, Squeegee Arm 1
12 980006 Washer, 5/16 Lock 6 26 W168D Screw, Set 1
13 920001 Nut, 10-32 Elastic Stop 2 27 962010 Screw, 1/4-20x1 HHCS 1
14 980007 Washer, 5/16 Flat 6
MOUNTING INSTRUCTIONS