MOVEMENT (machines with traction)
These machines are equipped with electronically controlled traction, with two speeds
foward and one backwards. To move the machine, turn the key (1) ON, wait for 3
seconds and then rotate the lever (2) on the handle bar - rotate forward to move
forward or backward to move in reverse. The first forward speed is obtained by
pushing the lever only a few millimeters. The second and faster speed is obtained by
pushing the lever all the way forward.
WARNING!
Lift the squeegee when moving backward.
14
OPERATION
DEVICE TOO FULL
The machine is equipped with a float that stops the vacuum when the recovery tank
is full. When this occurs, empty the recovery tank by removing the plug on the drain
hose.
WARNING! Use gloves for protection from contact with
dangerous solutions.
BRAKE (machines without traction)
The machine is equipped with a braking system controlled through the left lever (1),
which is used as both a parking and an emergency brake.
BRAKE (machines with traction)
The machine is equipped with an electronic braking system. To brake in normal
working conditions, just release the lever on the handle bar.
However, in case of an emergency, push down on the mechanical lever (1), as
shown above.
2
1
1
