Pacific PR836AS, Use, Care & Installation Manual

Page: 6 / 14

3. 3.
III. Installation Guidelines
Notice the surrounding of cooker hood. If there
are too many windows or a door nearby, it is
advisable to close the windows and door before
switching on the cooker hood to prevent the
external air current from affecting the suction.
The smoke has to rise up to 10inches from the
stove/grate to be within the range of suction
efficiency.
The ideal installation height is a distance of
26 to 36inches from the bottom of the hood to
the surface of the stove top.
The front, back, right and left of hood must be
in parallel and horizontal level, to avoid the oil
in the oil tub from spilling over. To ensure that
t he hood is leveled when installing, it can be
measured by the hook mark for the left and right
side; and the screws fixed securely onto the wall
to ensure the front and back of the hood are parallel.
ln order to increase the efficiency of hood efficiency of hood,
recommending using the provided 6 inch duct to maintain maximum
air flow efficiency; the length of duct must to be minimized.
Please do not arrange the hood socket with the other high electricity
consumption appliances.
Too many windows, too much
air current.
Pic. 1
Pic. 2
Pic. 3
1. Surrounding Environment (Pic.1)
2. Installation Heights (Pic.2)
3. Hood installed in parallel and horizontal level
(Pic.3)
4. Exhaust duct
5. Socket arrangement
26
~3
6
in
三.安裝原則
抽油煙機安裝位置
，
如在窗上 或附近有太多門窗
，
請在開動抽油煙機前
，
先關閉門窗
，
以免空氣對流
大而影嚮吸力
，
因當油煙上昇未至10吋之有效吸力
範圍
，
則無法充分發揮抽油煙最佳效果
。
1. 周圍環境(圖一) :
(圖一)
(圖二)
(圖三)
門窗太多
、
對流太大
安裝高度自本機底板至煮食爐面之距離以26~36吋
為最理想
。
2. 安裝高度(圖二) :
機體應保持前
、
後
、
左
、
右水平
，
以免氣流箱
，
導油
盆積油而溢出
。
左、右水平可由掛碼調整
，
前
、
後水平則由鋼丁螺
絲鎖緊牆壁
，
以固定標準
。
3. 機體應保持水平(圖三):
4. 排風管:
5. 插座安排:
為增加吸力效能
，
請配合使用本機出風管接頭之直
徑6吋排風管
，
排風管長度應以適合長度最佳
，
不宜
過長
。
請勿與烤箱或冰箱等耗電量較高之電器產品共用一個插座。
26
~3
6
in
2-4