13
UPON COMPLETION OF THE WORK
After finishing your work and before any type of maintenance is done, it is necessary
to do the following:
1.
Close the water valve through lever (1).
2.
Lift the brush base with lever (2).
3.
Lift the squeegee with lever (3). Note: The squeegee blades can be damaged if the
squeegee is not raised during storage or transport.
4.
Switch off the solenoid valve switch (1).
5.
Switch off the brush switch (2).
6.
Switch off the vacuum motor switch (3).
7.
Transport the machine to the location where the recovery tank should be emptied.
8.
Turn the key (4) OFF.
9.
Set the parking brake.
10. Pull out the hose on the front part of the recovery tank.
11. Unscrew the drain plug and empty the recovery tank.
Use gloves to protect yourself from contact with dangerous solutions.
12. Take the brush off and clean it with water (for brush disassembly please read the
section “DISASSEMBLY OF THE BRUSH”).
13. Slide the hopper out and clean thoroughly using gloves.
Summary of Contents for Floormaster 18B
Page 19: ...19 NOTES...
