In order to obtain the most comfortable riding position and offer the
best possible pedaling efficiency, the seat height should be set
correctly in relation to the rider’s leg length. The correct saddle height
should not allow leg strain from over-extension, and the hips should
not rock from side to side while pedaling. While sitting on the bicycle
with one pedal at its lowest point, place the ball of your foot on that
pedal. The correct saddle height will allow the knee to be slightly
bent in this position. If the rider then places the heel of that foot on
the pedal, the leg should be almost straight.
Ensure that the seat pillar does not extend beyond the
minimum insertion mark.
(Refer to p. 65 on how to adjust seat height.)
To obtain maximum comfort, the rider should not overextend his or her
reach when riding.
To adjust this distance, the position of the seat can be altered in
relation to the seat pillar. (Refer to p. 65 on how to adjust the seat
clamp.)
Maximum Height / Mini-
mum Insertion Mark
(Should not be visible)
Arms not over-
extended
Handlebar stem
height about the
same as
seat height
Pedal at
bottom position
5
11/99.bikemanual 11/24/99 3:50 PM Page 12
