MAINTENANCE
WEEKLY:
1. Inspect and clean the two vacuum inlet filters.
Re-
move the cover from the machine. The filters are now
accessible (see page 10). They are constructed of foam
attached to a plastic mounting ring. Slide the filters
off and clean by shaking or vacuuming. Replace if
there are any rips, tears or can’t be cleaned.
2. Inspect and clean the exhaust filter
. It is located
under the handle on the top of the machine (see page
8). Remove the filter and clean by shaking, vacuum-
ing or washing with water. Replace if there are any
rips, tears or if it can’t be cleaned.
VACUUM MOTOR MAINTENANCE:
Have the vacuum motors inspected annually by a factory
authorized service technician. If the carbon brushes are
worn, they should be replaced. This service will prolong
the life of the motor.
5
