Pacific Scientific REDI-LINE DA12A-500A User Manual Download Page 12

11

6. Maintenance

Because the REDI-LINE generator contains long life

bearings and brushes, it is virtually maintenance free.  A
periodic wipe down of the unit and inspection of all
mounting hardware for tightness is all that is needed. Cable
and battery connections should also be inspected regularly.

7. Service

If your REDI-LINE Generator should need service, contact

your nearest authorized REDI-LINE distributor. To obtain
the location of your nearest REDI-LINE distributor, contact
Pacific Scientific at 815-226-3100.

8. Warranty

Pacific Scientific warranties its REDI-LINE Generator
“Product(s)” to the original purchaser the “Customer”, and
in the case of original equipment manufacturers or
distributors to their original consumer the “Customer” to be
free from defects in material and workmanship and to be
made in accordance with Customer’s specifications which
have been accepted in writing by Pacific Scientific. In no
event, however, shall Pacific Scientific be liable or have any
responsibility under such warranty if the Products have
been improperly stored, installed, used or maintained, or if
Customer has permitted any unauthorized modifications,
adjustments and/or repairs to such Products. Pacific
Scientific’s obligation is limited solely to repairing or
replacing (at its option), at its approved repair facility, any
Products, or parts which prove to Pacific Scientific’s
satisfaction to be defective as a result of defective materials
or workmanship, in accordance with Pacific Scientific’s
stated warranty, provided, however, that written notice of
claimed defects shall have been given to Pacific Scientific
within two (2) years after the date of the product date code
that is affixed to the Product, and within thirty (30) days
from the date any such defect is first discovered. The
Products or parts claimed to be defective must be returned
to Pacific Scientific, or an Authorized Redi-Line distributor,
transportation prepaid by customer, with written
specifications of the claimed defect. Evidence acceptable to
Pacific Scientific must be furnished that the claimed defects
were not caused by misuse, abuse, or neglect by anyone
other than Pacific Scientific.

THE FOREGOING WARRANTIES ARE IN LIEU OF ALL
OTHER WARRANTIES (EXCEPT AS TO TITLE), WHETHER
EXPRESSED OR IMPLIED, INCLUDING WITHOUT
LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR
OF FITNESS FOR ANY PARTICULAR PURPOSE, AND ARE
IN LIEU OF ALL OTHER OBLIGATIONS OR LIABILITIES
ON THE PART OF PACIFIC SCIENTIFIC. PACIFIC
SCIENTIFIC’S MAXIMUM LIABILITY WITH RESPECT TO
THESE WARRANTIES, ARISING FROM ANY CAUSE
WHATSOEVER, INCLUDING WITHOUT LIMITATION,

BREACH OF CONTRACT, NEGLIGENCE, STRICT
LIABILITY, TORT WARRANTY, PATENT OR COPYRIGHT
INFRINGEMENT, SHALL NOT EXCEED THE PRICE
SPECIFIED OF THE PRODUCTS GIVING RISE TO THE
CLAIM, AND IN NO EVENT SHALL PACIFIC SCIENTIFIC
BE LIABLE UNDER THESE WARRANTIES OR
OTHERWISE, EVEN IF PACIFIC SCIENTIFIC HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, FOR
SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,
INCLUDING WITHOUT LIMITATION, DAMAGE OR LOSS
RESULTING FROM INABILITY TO USE THE PRODUCTS,
INCREASED OPERATING COSTS RESULTING FROM A
LOSS OF THE PRODUCTS, LOSS OF ANTICIPATED
PROFITS, OR OTHER SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES, WHETHER SIMILAR OR
DISSIMILAR, OF ANY NATURE ARISING OR RESULTING
FROM THE PURCHASE, INSTALLATION, REMOVAL,
REPAIR, OPERATION, USE OR BREAKDOWN OF THE
PRODUCTS, OR ANY OTHER CAUSE WHATSOEVER,
INCLUDING PACIFIC SCIENTIFIC’S NEGLIGENCE.

The forgoing shall also apply to Products, or parts for the
same which have been repaired or replaced pursuant to such
warranty.

No person,including any agent, distributor, or representative
of Pacific Scientific, is authorized to make any
representation or warranty on behalf of Pacific Scientific
concerning any Products manufactured by Pacific Scientific,
except to refer purchasers to this warranty.

Summary of Contents for REDI-LINE DA12A-500A

















Reviews: