PACIFIC RIM INT’L WEST PST250-1, Manual, Page: 28 / 45

until it seats, but not screw it in. the oil should be
between the upper lever mark
②
and the lower
lever mark
③
. If necessary, add the recommended
oil until it reaches the upper level mark, do not
overfill.
REPLACING ENGINE OIL
The engine oil replacement should be carried out
when the engine is warm, when replacing the engine
oil, support your motorcycle with side stand to
facilitate draining the oil fully. The procedure is as
follow shown:
1) Stand your motorcycle with side stand. Put a
drain pan under the engine.
2) Unscrew and remove the oil drain bolt
①
under the engine to drain the dirt oil.
WARNING
To avoid unnecessary hurt when the fuel and engine
oil was heated.
3) stamp the kick starter lever for several times to
drain the remaining oil.
4) Replace the used oil filtering net with a new
one, check whether the spring and sealing washer are
well installed.
26