LMX SERIES™ OPERATION MANUAL
Entire Contents Copyright
2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
LMX Series Power Source Operation Manual
Page 132 of 463
6.6.10
PULSE Mode
PULSE transient mode provides a quick and easy way to enter repetitive pulsed output
events. This applies to AC voltage and or Frequency. A sample of a PULSE transient
definition is shown in the screen capture below.
The parameters that define a PULSE transient are dependent of each other so changing one
may force another to change. The semantics used for setting PULSE transients is as follows:
Parameter
Description
RAMP
Up or down ramp time
WIDTH
Duration of pulse including rising and failing ramp times
PERIOD
Total time duration for a single pulse
DUTY
Duty cycle of the pulse
The DUTY cycle is determined by the other three parameters as in:
DUTY = WIDTH x 100 / PERIOD
