AFX SERIES® OPERATION MANUAL
Entire Contents Copyright
2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
AFX Series Power Source Operation Manual
Page 180 of 485
6.8.8
SYSTEM SETTINGS Screen
This screen allows system level settings such date and time to be changed. It also access to
the UPC Compatibility mode setting.
Figure 6-35: SYSTEM SETTINGS Screen
The following parameters can be set from this screen:
Date
Sets the date for the real-time clock.
Time
Sets the time for the real-time clock.
Use Network Time Protocol
When set, the time and date will be adjusted based on the
NTP protocol. This requires the unit to be connected to a
local area network.
Time zone UTC offset
This parameter sets the number of time zone from UTC
where the unit is located to reflect local time. Coordinated
Universal Time (UTC) is the primary time standard by which
the world regulates clocks and time. It does not observe
daylight saving time.
The soft keys on the SYSTEM SETTINGS screen provide access to additional functionality as
listed in the table below.
SOFT KEY
Description
Apply All (SK1)
Applies all changes made to this screen.
Cancel All (SK2)
Cancels any changes made and returns to previous screen
Sanitize
Erases all user settings from the unit and returns it to its factory
default state.
Reboot
Reboot front panel controller without cycling AC input power.
Back (SK5)
Returns to the previous screen.
Table 6-36: Available SYSTEM SETTINGS screen soft keys
Summary of Contents for AFX Series
Page 484: ......
