SETUP
1. Remove all tapes that hold items in place for shipping.
2. Place the Glite 965BW unit on a flat surface.
3. Connect the included AC adapter to the back of the unit then plug into an electrical outlet.
4. Push power button.
5. Insert a USB flash drive.
6. The Menu Mode icon will be displayed on top left side of the display (
Figure 4
).
7. Place a gel to the center of the surface of the lighting area (
Figure 5, 6
).
8. Adjust image conditions then scan.
5
Figure 5
Place the gel directly
Menu mode icon
Figure 4
Place gel to the center of the lighting area
Figure 6
