background image

Page 28

SKU 98444

For technical questions, please call 1-800-444-3353.

Harbor Freight tools emission control defects 

warranty Provisions

1.  Length of coverage

HFT warrants to a first retail purchaser and each subsequent 

purchaser that the engine is free from defects in materials 

and workmanship that cause the failure of warranted parts 

for a period of two (2) years after the date of delivery to the 

first retail purchaser.

2.  no charge repair or replacement

Repair or replacement of any warranted part will be performed 

at no charge to the owner if the work is performed through a 

warranty station authorized by HFT.  For emissions warranty 

service, contact the HFT Customer Service Department at 

1-800-444-3353.

3.  consequential damages coverage

Coverage under this warranty shall also extend to the failure 

of any engine components caused by the failure of any war-

ranted part while it is still covered under this warranty.

4.  coverage exclusions

Warranty claims shall be filed in accordance with the provi

-

sions of the HFT warranty policy explained in the box at the 

top of the previous page.  HFT shall not be liable for any loss 

of use of the engine, for any alternative usage, for any damage 

to goods, loss of time, or inconvenience.  Warranty coverage 

shall also be excluded for any part which fails, malfunctions, 

or is damaged due to failure to follow the maintenance and 

operating instructions set forth in the Owner’s Manual includ-

ing, but not limited to:

Use of parts which are not authorized by HFT

a) 

Improper installation, adjustment or repair of the engine 

b) 

or of any warranted part unless performed by an autho-

rized warranty center
Failure to follow recommendations on fuel use contained 

c) 

in the Owner’s Manual
Improper or inadequate maintenance of any warranted 

d) 

parts
Repairs performed outside of the authorized warranty 

e) 

service dealers
Alterations by changing, adding to or removing parts 

f) 

from the engine.

5.  service and Maintenance

Component parts which are not scheduled for replacement 

as required maintenance or are scheduled only for regular 

inspection to the effect of “repair or replace as necessary” 

are warranted for the warranty period. Any warranted part 

which is scheduled for replacement as required maintenance 

is warranted for the period of time up to the first scheduled 

replacement point for that part.  Any replacement part, pro-

vided it is equivalent in durability and performance, may be 

used in performance of maintenance or repairs.  The owner 

is responsible for commissioning a qualified technician/me

-

chanic to perform all required maintenance, as outlined in 

the  Inspection,  Cleaning,  and  Maintenance  section  in  this 

manual.

6.  warranted Parts

1)  Fuel Metering system

Carburetor and its internal parts.

i) 

Fuel pump (if so equipped).

ii) 

Cold start enrichment system.

iii) 

2)  air induction system

Intake pipe/manifold.

i) 

Air cleaner.

ii) 

3)  ignition system

Spark plug.

i) 

Magneto ignition system.

ii) 

4)  catalyst system (if so equipped)

Exhaust pipe stud.

i) 

Muffler.

ii) 

Catalytic converter (if so equipped).

iii) 

5)  Miscellaneous items used in above systems

Vacuum,  temperature  and  time  sensitive  valves 

i) 

and switches.
Hoses, belts, connectors, and assemblies.

ii) 

Summary of Contents for 98444





























Reviews: