Pacific hydrostar 95619 Assembly And Operating Instructions Manual Download Page 5

SKU 95619     

For technical questions please call 1-800-444-3353

 

Page 5  

Clean up fuel spills immediately.

32. 

 Dispose of fluids and cleaning materials in ac

-

cordance with local, state or federal regulations. Store oily rags in a metal container. 

Store gasoline in a well ventilated, secure locker.

Do not smoke and do not allow fire flame or electrical ignition sources near the 

33. 

pressure washer or any fuel or flammable materials.
Keep grounded electrically conductive tools and appliances away from any 

34. 

source of flammable materials. 

Electrical items can cause ignition of flammable 

fumes and materials.

Do not refill the fuel tank on the pressure washer while the engine is running or 

35. 

hot.

 Do not operate the pressure washer if there are any leaks in the fuel system.

use only the types and grades of fuel, oil and other lubricants recommended 

36. 

by the engine manufacturer.

 

WaRninG:

37. 

 The brass components of this product contain lead, a chemical known to 

the State of California to cause birth defects or other reproductive harm. (California 

Health and Safety Code § 25249.5, 

et. seq.

)

The warnings, cautions, and instructions discussed in this instruction manual cannot 

38. 

cover all possible conditions and situations that may occur. It must be understood by 

the operator that common sense and caution are factors which cannot be built into 

this product, but must be supplied by the operator.

Summary of Contents for 95619

















Reviews: