Pacific hydrostar 65078 Set-Up & Operating Manual Download Page 5

Page 5

For technical questions, please call 1-800-444-3353.

SKU 65078 

        

Do not operate in explosive 

7. 

atmospheres, such as in the 

presence of flammable liquids, gases, 

or dust.  Gasoline-powered engines 

may ignite the dust or fumes.
Stay alert, watch what you are 

8. 

doing and use common sense when 

operating a piece of equipment.  Do 

not use a piece of equipment while 

tired or under the influence of drugs, 

alcohol or medication.
Do not overreach.  Keep proper 

9. 

footing and balance at all times.  

This enables better control of the 

equipment in unexpected situations.
Do not carry the spray handle with 

10. 

your finger on the trigger, whether 

engine is operating or not.
Use this equipment with both hands 

11. 

only.  Using equipment with only 

one hand can easily result in loss of 

control.
Dress properly.  Do not wear loose 

12. 

clothing or jewelry.  Keep hair, 

clothing and gloves away from 

moving parts.  Loose clothes, jewelry 

or long hair can be caught in moving 

parts.
Parts of the Pressure Washer, 

13. 

especially exhaust system 

components, get very hot during use.  

Stay clear of hot parts.
Do not cover the engine or equipment 

14. 

during operation.
Keep the equipment, engine, and 

15. 

surrounding area clean at all times.
Use the equipment, accessories, etc., 

16. 

in accordance with these instructions 

and in the manner intended for the 

particular type of equipment, taking 

into account the working conditions 

and the work to be performed.  Use 

of the equipment for operations 

different from those intended could 

result in a hazardous situation.
Do not operate the equipment with 

17. 

known leaks in the engine’s fuel 

system.
This product contains or, when 

18. 

used, produces a chemical known 

to the State of California to cause 

cancer and birth defects or other 

reproductive harm.  (California Health 

& Safety Code § 25249.5, 

et seq.

WARNING:  The brass components 

19. 

of this product contain lead, a 

chemical known to the State of 

California to cause birth defects (or 

other reproductive harm). (California 

Health & Safety code § 25249.5, 

et 

seq.

)

When spills of fuel or oil occur, they 

20. 

must be cleaned up immediately.  

Dispose of fluids and cleaning 

materials as per any local, state, 

or federal codes and regulations.  

Store oil rags in a bottom-ventilated, 

covered, metal container.
Keep hands and feet away from 

21. 

moving parts.  Do not reach over or 

across equipment while operating.
Before use, check for misalignment 

22. 

or binding of moving parts, breakage 

of parts, and any other condition 

that may affect the equipment’s 

operation.  

if damaged, have the 

equipment serviced before use.

  

Many accidents are caused by poorly 

maintained equipment.

Summary of Contents for 65078






































Reviews: