Pacific Floorcare S-20, Manual

Page: 18 / 66

RETURN TO
TABLE OF
CONTENTS
- 13 -
INSPECTION & CLEANING
To clean out the solution tank in the case of excessive debris:
1. Close the shutoff valve (located under the machine).
2. Remove the filter bowl and screen (located forward of the
shutoff valve).
3. Open the shutoff valve and allow the tank to drain.
4. Rinse the solution tank thoroughly.
5. Install the filter bowl and screen.
SCRUB HEAD
1. Depress the foot lever (located at the lower right rear corner of the machine) and shift it to the right.
2. Once clear of the notch, allow the lever to rise while the head lowers into the operating position.
3. Disk machines are equipped with a self-adjusting shroud and bristle skirt that virtually eliminates over-spray.
SELECTING DOWN PRESSURE
• Standard: For daily cleaning of normal soils.
• Heavy: For toughest soils or chemical-free finish removal.
HEAD LIFT
Scrub Head Raised Scrub Head Lowered Scrub Head Lowered
Heavy Down Pressure