Pacific energy Pacific VISTA, Operating Instructions Manual

Page: 6 / 20

705mm
156mm
632mm
145mm
403mm
499mm
145mm
403mm
510mm
156mm
610mm
705mm
403mm
145mm
510mm 610mm
159mm
705mm
6 220514-20
Assembly
Crate Removal:
1) Carefully remove wood top and supports.
2) Remove plastic cover.
3) Using a 7/16" wrench, remove lag bolts that secure
stove body to bottom pallet.
4) Place stove body carefully on its back.
5) Using a 3/4" wrench, remove 1/2" nuts and save them
for later use.
6) Remove pallet retaining brackets from stove bottom.
Pedestal Kit:
1) With the unit on its back and removable cover facing
up, align the pedestal mounting holes with the studs
on stove bottom.
2) Secure in place with 1/2" nuts previously removed.
3) Carefully place the unit in an upright position.
Leg Kit:
1) With the unit on its back and removable cover of the
ash drawer enclosure facing up, align mounting holes
with studs on stove bottom.
2) Position the legs on the stove.
3) Place the 1/2" washers over the studs and secure in
place with 1/2" nuts previously removed.
4) Carefully place the unit in an upright position.
Optional Ash Cleanout System:
1) With stove body laying on its back, remove the ash
system hole cover and gasket located under the stove.
Discard cover plate and gasket.
2) Inside the stove, remove the two bolts for the ash dump
from the fi rebox bottom and insert into the brick retainer
with the fl anges on the the brick retainer pointed away
from the threads on the bolts.
3) Replace bolts with brick retainer in the fi rebox
bottom.
4) Place new gasket provided over existing bolts.
5) Install ash dump system over gasket and secure with
two nuts previously removed.
FIG. #1
Pacifi c Vista - Pedestal Model
Pacifi c Vista - Leg Model
Vista Classic