9
OWNER’S
INFORMATION
5056.412-E
Temperature indication Display
With the system in the “OFF” position, press the Thermostat Key and the
Mode Key at the same time. Look at the LCD screen on the transmitter to
verify that a C or F is visible to the right of the Room Temperature display.
(Fig. 6 & 7)
Turn on the Appliance
First, turn the switch on the battery box – located on the rear of the unit, to
the off position (denoted as a
‟
-
”
sign). With the system OFF, press the
ON/OFF Key on the Transmitter. The Transmitter display will show all active
Icons on the screen. At the same time, the IFC will be commanded to start
the ignition process. Once the pilot flame operation is confirmed, the IFC
board will open the main valve outlet and the appliance main burner will
ignite. A single “beep” from the IFC module will confirm reception of the
command.
Turn off the Appliance
With the system ON, press the ON/OFF Key on the Transmitter. The
Transmitter LCD display will only show the room temperature. At the same
time the IFC will be commanded to turn off the burner. Depending on the
system mode (IPI or CPI) the pilot may shut off (IPI) or remain lit (CPI) and
the appliance burner turns OFF. A single “beep” from the Receiver confirms
reception of the command.
Manual Bypass of the Remote System
If the batteries of the receiver or transmitter are low or depleted, the
appliance can be turned off manually using switch located on battery box.
This will bypass the remote control feature of the system.
Key Lock
This function will lock the keys to avoid unsupervised operation.
To activate this function, press the MODE and UP keys at the same time
(fig.8).
To de-activate this function, press the MODE and UP keys at the same time.
Figure 6: Display in Fahrenheit
Figure 7: Display in Celsius
Figure 8
