Temperature indication Display
With the system in the “OFF” position, press the Thermostat Key
and the Mode Key at the same time. Look at the LCD screen on the
transmitter to verify that a C or F is visible to the right of the Room
Temperature display (Figure 6 or Figure 7).
Turn on the Fireplace
With the system OFF, press the ON/OFF Key on the remote
transmitter. The remote transmitter display will show some other
active Icons on the screen. At the same time the Receiver will
activate the Heater. A single “beep” from the Receiver (module) will
confirm reception of the command.
Turn off the Fireplace
With the system ON, press the ON/OFF Key on the Remote
transmitter. The Remote transmitter LCD display will only show
the room temperature (Figure 6 or Figure 7). At the same time the
Receiver (module) will turn off the Heater. A single “beep” from the
Receiver confirms reception of the command.
Manual Bypass of the Remote System
If the batteries of the receiver or remote transmitter are low
or depleted, the Heater can be turned off manually using ON/
OFF switch located on battery box at the rear of the Broadway/
Brentwood. This will bypass the remote transmitter.
Key Lock
This function will lock the keys to avoid unsupervised operation.
To activate this function, press the MODE and UP keys at the
same time. The lock icon will appear (Figure 8). To de-activate this
function, press the MODE and UP keys at the same time.
Figure 6: Display in Fahrenheit.
Figure 7: Display in Celcius.
Figure 8: Key lock.
9
280617-40
5056.201-A
ESPRIT
