6
7
Assembly:
Attach the wheels
❶ Attach the gear wheel.
• Firmly press the gear wheel into the gear
box (located under the body in the wheel
well) until the wheel is completely inserted
into the gearbox
• Insert a washer onto the rear axle until it
meets the wheel
• Fasten the wheel nut onto the end
of the axle. Do not tighten the wheel
nut at this time
❷ Attach the opposite rear wheel.
• Slide a washer onto the front axle until it
reaches the notch on the axle.
• Insert the wheel onto the axle until it
meets the washer
• Slide a second washer onto the axle until it
meets the wheel
• Using the two wrenches you removed from
the rear axle tighten each rear wheel nut,
turning in opposite directions at the same
time.
❸ Attach the front wheels.
• Slide a washer onto the front axle until it
reaches the notch on the axle.
• Insert the wheel onto the axle until it
meets the washer
• Slide a second washer onto the axle until it
meets the wheel
• Using the two wrenches you removed from
the rear axle tighten each wheel nut.
❹ Attach the hubcaps caps.
• Align the tabs of the hubcaps with the slots
in the wheel rim and press the hubcaps in
until the hubcap snaps into place
Follow the assembly steps in the order listed below.
❷
❸
❸
❹
❹
❹
❹
The wrench and the
wheel nut come
attached to the axle
❶
