5
4.
Plug the handlebar connector
into the motor connector.
1.
Remove the locknut with the nut
wrench from the front axle.
2.
Slide a washer onto the front
axle. Place an inner bushing (tab
wheel on the axle and slide the inner
bushing inside the wheel. Place the
outer bushing onto the axle and
slide inside the wheel. Then place
another washer onto the axle.
4.
Align the 3 tabs on the wheel
cover with the slots in the outer
bushing and snap into place.
5.
Repeat for the other side.
1.
Plug the wire connector into the
battery connector.
(ZZLTISPUN[OL/HUKSLIHY*VU[PU\LK
(ZZLTISPUN[OL-YVU[>OLLSZ
*VUULJ[PUN[OL=LOPJSL)H[[LY`
MOTOR CONNECTOR
WHEEL COVER
WHEEL
INNER BUSHING
WASHER
WASHER
LOCK NUT
OUTER BUSHING
HANDLEBAR CONNECTOR
3.
Attach a locknut onto the axle and
tighten snugly with the nut wrench.
DO NOT OVERTIGHTEN.
