background image

TAKE-DOWN INSTRUCTIONS

IMPORTANT :

 DO NOT USE EXCESSIVE FORCE DURING TAKING-DOWN.

PLEASE REMOVE ANCHORS AND GUY ROPES BEFORE TAKING DOWN  

    SCREEN & CORNER CURTAIN ASSEMBLY

1. Unpack the screen and corner curtain combo kit, locate the

    the zipper end of the screen panel, position it in the middle of

    two legs. Place the combo out around the frame. 

2. Lift the inside valance, match the combo up to frame. 

    Attach the combo panels to cross tubes by velcro straps.

3. Tuck the upper corner of screen upto the corner of outside 

    valance. Secure to the upper corner frame with velcro straps.  

4. Further secure combo to legs with velcro straps.

5. You may zip the screen all around to keep insects out. Or leave 

    one side unzipped as entrance. by adjusting the attachement 

    location of combo panels at cross beams, you may hold back 

    the combo panels with tiebacks for drapery look. 

2 of 2

SUGGESTED SCREEN USAGES

1. Please reverse the screen assembly procedures

    to remove the screen. 

Warning: 

to keep the 

    crotchets on velcro from catching your screen,  

    please press firmly together the male and female 

    strips of velcro and form the loop right after undo 

    the velcro from tubes.

2. With the partner, lift two adjacent outer legs 

    slightly, depress snap button and telescope inner 

    legs up into outer legs. Undo the velcro straps of 

    the fabric top from around the roof tubes and

    cross beams.

 Failure to do so may result in the

    tear of fabric during take-down. 

3. 

CRITICAL STEP TO AVOID FRAME DAMAGE!

    Release sliders at all four corners by gently

    depressing the push button and pushing the sliders

    down a bit.  

4. With partner on the opposite side, grasp the

    upper portion of outer legs and slightly lift up. 

    Shake the frame slightly and step towards

    partner until the canopy is 3/4 closed. 

Please 

    do not push too hard!

 

5. Grasp the adjacent outer legs and push the unit 

    together until fully closed. 

Be careful not to 

    pinch your fingers!

    Make sure the fabric canopy is completely dry 

    and then returns your folded pop up gazebo to

    the carry bag for storage.    

 8. Stake down the gazebo by driving the 4 small anchors

     through the hole on each base foot. This will keep the

     leg from moving sideways in mild weather conditions.

 9. Measure out from the leg to a proper distance and secure

     the four big anchors to ground at 45 degree angle. Tie up

     one end of each guy rope to triangular shaped rope holder

     located on the outside fabric corners. Tie the other end of 

     each rope to the anchor on the ground. Make sure the guy

     ropes have the proper tension.

     THIS GAZEBO MUST BE SECURED TO THE GROUND

     WITH ANCHORS AND GUY ROPES. 

If you have any questions or comments about this product, please contact us at 

[email protected] or Customer Service Line: (888) 445 - 6690

Reviews: