PACH & COMPANY Quantum QR5 Series Programming Manual Download Page 1

Page: 1 / 34

QR5/QR5IP SERIES MANUAL

file:///C|/PACH-CO.COM-2022-B/online_manual/qr5_manual.htm[4/25/2022 2:58:06 PM]

QUANTUM QR5/QR5IP SERIES

PROGRAMMING MANUAL V04122022

TABLE OF CONTENTS

Table of Contents Limitation of Liability

Products Limited Warranty

Limited Warranty Limits and Exclusions

CHAPTER 1 GETTING STARTED

CHAPTER 2 INSTALLATION AND WIRING DIAGRAM

General Wiring Diagram

CHAPTER 3 KEYPAD CORRELATION TABLE

CHAPTER 4 PROGRAMMING

Log-in to Programming Mode
Function Code 00: Change Master Code
Function Code 01: Add New Tenant Directory
Function Code 02: Edit Existing Directory
Function Code 03: Delete Tenant Directory
Function Code 04: Clear All Tenant Directories
Function Code 05: Enable or disable Call
Function Code 06: Add New Access Code
Function Code 07: Delete Access Code
Function Code 08: Clear All Access Codes
Function Code 09: Access Code Digit

Function Code 23: Lock-out Count
Function Code 24: Alarm
Function Code 25: Keypad Beep
Function Code26: Door Beep
Function Code 27: Talk Time
Function Code 28: Unlock Relay 1 Time
Function Code 29: Unlock Relay 2 Time
Function Code 30: Enable Automatic Call Forwarding
Function Code 31: Call Forwarding Time
Function Code 32: Call Forwarding Directory
Function Code 33: Temporary Code
Function Code 34: Special Code
Function Code 35: Temporary Card
Function Code 36: Special Card
Function Code 38: System Acknowledge
Function Code 39: Disable and Enable Remote Access
Function Code 40: DTMF Relay 1
Function Code 41: DTMF Relay 2
Function Code 42: Relay 2 Mode
Function Code 43: Do Not Disturb Zone
Function Code 44: Disable Time Zone Relay
Function Code 45: Relay 1 and 2 Unlock Timer
Function Code 46: Firmware Version
Function Code 48: PBX Enable
Function Code 49: Edit Existing Access Code,
Temporary Code and Special Code

Summary of Contents for Quantum QR5 Series



































Search results

Summary of Contents for Quantum QR5 Series

Reviews:

Related manuals for Quantum QR5 Series

Brands by name

Popular brands

PACH & COMPANY Quantum QR5 Series, Programming Manual

Search results

Summary of Contents for Quantum QR5 Series

Reviews:

Related manuals for Quantum QR5 Series

Brands by name

Popular brands