PACH & COMPANY QUANTUM QC Series, Manual

Page: 26 / 33

QC SERIES MANUAL
file:///C|/PACH-CO.COM-2022-B/online_manual/qc_series_manual.htm[4/27/2022 8:58:09 AM]
If no remote opening allow, disable it using this function code. Default setting is enabled.
1. Log-in to programming
2. Enter 39 then #
3. Press
0 = disable remote access
1 = enable remote access (default)
then press #
Function Code 40 DTMF Relay 1
By default the DTMF remote opening relay 1 (door 1) key number is set to 9 means pressing 9 will remotely trigger relay 1
(door 1). The number can be changed by selecting 1-9 to trigger relay 1 (door 1). Note: by default remote access for relay
2 is set to 8, see
function code 41 . If you set relay 1 for key number 8 then you MUST change relay 2 to different key
number even though relay 2 is not used.
1. Log-in to programming
2. Enter 40 then #
3. Press 1-9 (9 is default setting) then press #
Function Code 41 DTMF Relay 2
By default the DTMF remote opening relay 2 (door 2) key number is set to 8 means pressing 8 will remotely trigger relay 2
(door 2). The number can be changed by selecting 1-9 to trigger relay 2 (door 2). Note: by default remote access for relay
1 is set to 9, see
function code 42 . If you set relay 2 for key number 9 then you MUST change relay 1 to different key
number even though relay 1 is not used.
1. Log-in to programming
2. Enter 41 then #
3. Press 1-9 (9 is default setting) then press #