23
Disassembly and Assembly of the PaceSaver Scout Boss & Boss 6NS
The power wheelchair's easy separation makes it very conve-
nient to disassemble and assemble the unit. Complete disassembly
can be accomplished in seconds WITHOUT tools. The procedure is as
follows.
Make sure the power button has been placed in the off (no lights) posi-
tion. Remember, it should already be in the OFF position since it
was placed there when you last got off the wheelchair. Disconnect
the power cord located at the rear of the seat on the seat bracket, unpin
the seat at all four points, lift the seat assembly up and remove.
Lift off the rear cover while passing the cable and connector through
the hole in the cover.
Disconnect ea ch b a t t e r y by depressing the tab on each battery
plug to unplug the cable. Remove both batteries. (See Page 31)
Remove the Footplate/Stabilizer wheel assembly from the front of the
wheelchair, by removing the four wing-nutted bolts holding it to the
main frame assembly. Raise the front footplate section up out of the
way.
Summary of Contents for Scout
Page 37: ...37...
