background image

4

Pace Xi5 (PX051AEI) USER GUIDE (DRAFT-160208)

In addition to the Important Safety Instructions, please read the Safety 
Information below.

Power sources

The model number, serial number, and electrical rating of this set-top box 
are on a label on its base.

You must operate your set-top box only from the type of power source 
indicated on the marking label. If you are not sure of the type of power 
supply to your home, consult your dealer or local power company. If you 
move your set-top box between locations at different temperatures, allow it 
to reach room temperature before you apply power to it.

Overloading

Do not overload wall AC outlets, extension cords or other power outlets as 
this can result in a risk of fire or electric shock.

To avoid possible damage to your set-top box or to a connected TV or 
component, all AC power cords must be plugged into properly wired 
outlets. As with all electrical products, connection to faulty or defective 
components, or the failure to connect your set-top box to a properly wired 
outlet, may cause sparking, property damage or damage to any TV or other 
component connected to your set-top box and pose a fire hazard.

Lightning

For added protection for your set-top box during a lightning storm, or when 
it is left unattended and unused for long periods of time, disconnect your 
set-top box from the power supply and disconnect the cable system from 
your set-top box. See also item 13 in the Important Safety Instructions.

Ambient temperature

The operating temperature range of your set-top box is 32-104°F. If the 
ambient temperature around your set-top box falls outside this range, you 
must correct this in order for your set-top box to work correctly and safely. 
For example, if the temperature is too high, make sure there is sufficient 
ventilation (see below) and that your set-top box is not directly on top of or 
underneath other equipment.

Ventilation

Slots and openings in the casing of your set-top box are provided for 
ventilation, to ensure reliable operation of your set-top box and to protect it 
from overheating.

•  Never block the ventilation 

openings by placing your set-top 
box on a bed, sofa, rug, or other 
similar surface. Place it on a 
hard, flat surface.

•  Never cover the ventilation 

openings with items such as 
newspapers, table-cloths, or 
curtains.

•  You can place your set-top box 

near other consumer electronics 
devices, such as stereo 
amplifiers or televisions, but you 
must not place it directly on top or underneath them.

3 in.

3 in.

3 in.

•  Do not place your set-top box in a built-in installation such as a 

bookcase or rack unless proper ventilation is provided and you have 
adhered to the manufacturer’s instructions.

• 

Maintain a minimum distance of three inches around your 
set-top box for sufficient ventilation.

See also item 7 in the Important Safety Instructions.

Water and moisture

Do not expose your set-top box to rain or moisture, dripping or splashing, 
and ensure that no objects filled with liquids, such as vases, are placed on 
your set-top box. See also item 5 in the Important Safety Instructions.

Entry of objects and liquids

Never push objects of any kind into your set-top box through openings 
as they may touch dangerous voltage points or short-out parts that could 
result in fire or electric shock. Never spill liquid of any kind on your set-
top box.

Transporting

Move the combination of set-top box and cart with care. Quick stops, 
excessive force and uneven surfaces may cause the combination of 
set-top box and cart to overturn. See also item 12 in the Important Safety 
Instructions.

Placement and mounting

Do not place your set-top box on an unstable or uneven surface. Your 
set-top box may fall, causing serious injury to a child or adult and serious 
damage to your set-top box. If you mount your set-top box, for example 
to a wall or ceiling, follow the manufacturer’s instructions and use a 
mounting accessory recommended by the manufacturer. See also item 12 
in the Important Safety Instructions.

Risk of fire or scorching

Never place naked flame sources, such as lighted candles, on or adjacent 
to your set-top box.

Replacement parts

When replacement parts are required, be sure that the service technician 
has used replacement parts specified by the manufacturer or that have 
the same characteristics as the original part. Unauthorized substitutions 
may result in fire, electric shock or other hazards. See also item 14 in the 
Important Safety Instructions.

Safety check

Upon completion of any servicing or repairs to your set-top box, ask the 
service technician to perform safety checks to determine that your set-top 
box is in its proper operating condition. See also item 14 in the Important 
Safety Instructions.

SAVE THIS INFORMATION FOR FUTURE REFERENCE

SAFETY INFORMATION (cont.)

Summary of Contents for Xi5















Reviews: