background image

3

XG1-P (PX001BNT and PX001BNM) USER GUIDE DRAFT (501-100190x)

SAFETY INFORMATION

This digital set-top box has been manufactured and tested with your safety 
in mind. However, improper use can result in potential electric shock, 
property damage or fire hazards. To avoid defeating the safeguards that 
have been built into your set-top box, please observe the precautions 
discussed in this document.

To ensure correct operation, use this set-top box only with the Pace-
approved power supply unit provided. If you use an unapproved 
alternative, you will invalidate the warranty.

Other warnings

To reduce the risk of electric shock, do not remove the cover of your set-
top box. There are no user-serviceable parts inside it.

Do not perform any servicing unless you are qualified to do so. Refer all 
servicing to qualified service personnel. Servicing the set-top box yourself 
will invalidate the warranty.

To reduce the risk of fire or electric shock, do not expose this set-top box 
to rain or moisture.

On the rear panel of your set-top box there is a tamper-evident label that 
states ‘Warranty void if broken or removed’.

To avoid possible damage to the internal hard disk, do not pick up or move 
your set-top box while it is connected to the power supply. If you want to 
move your set-top box, first stop any recording, then turn off your set-top 
box and wait 60 seconds before disconnecting it. You should handle your 
set-top box carefully, as any damage you cause to the internal hard disk (or 
any other component) will invalidate your warranty.

Installation

The installation of your set-top box should be carried out by a qualified 
installer and should conform to local codes.

Note to the installer

This reminder is provided to call the attention of the cable-TV-system 
installer to Section 820 of the National Electrical Code (USA), which 
provides guidelines for proper grounding and, in particular, specifies 
that the cable ground shall be connected to the grounding system of the 
building, as close to the point of cable entry as is practical.

IMPORTANT SAFETY INSTRUCTIONS

Before you install or use the apparatus, you must read and 
understand these Important Safety Instructions.  
At all times when using the apparatus you must follow 
these Important Safety Instructions to reduce the risk of fire, 
electrical shock and injury to persons.
1.  Read these instructions.
2.  Keep these instructions.
3.  Heed all warnings.
4.  Follow all instructions.
5.  Do not use this apparatus near water.
6.  Clean only with dry cloth.
7.  Do not block any ventilation openings. Install in accordance 

with the manufacturer’s instructions.

8.  Do not install near any heat sources such as radiators, heat 

registers, stoves, or other apparatus (including amplifiers) 
that produce heat.

9.  Do not defeat the safety purpose of the polarized or grounding-

type plug.  A polarized plug has two blades with one wider than 
the other.  A grounding type plug has two blades and a third 
grounding prong. The wide blade or the third prong are provided 
for your safety. If the provided plug does not fit into the outlet, 
consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched 

particularly at plugs, convenience receptacles, and the point 
where they exit from the apparatus.

11. Only use attachments/accessories specified by the 

manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified 

by the manufacturer, or sold with the apparatus. When a 
cart is used, use caution when moving the cart/apparatus 
combination to avoid injury from tip-over.

Service address: 
Pace Americas Inc. 
3701 FAU Boulevard, Suite 200, Boca Raton, Florida 33431 U.S.A.

The lightning flash with arrowhead symbol, within a triangle, 
is intended to alert you to the presence of uninsulated 
“dangerous” voltages within your set-top box’s enclosure 
that may be of sufficient magnitude to constitute a risk of 
electric shock to persons.

The exclamation point within a triangle is intended to alert 
you to the presence of important instructions in the literature 
accompanying your set-top box.

Warnings on the power supply unit

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

13. Unplug this apparatus during lightning storms or when 

unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing 

is required when the apparatus has been damaged in any 
way, such as power-supply cord or plug is damaged, liquid 
has been spilled or objects have fallen into the apparatus, the 
apparatus has been exposed to rain or moisture, does not 
operate normally, or has been dropped.

Summary of Contents for XG1-P















Reviews: