TELKOM VPN-Lite 2.5 ver.100712
Page 9
Note that the router uses the subnet syntax instead of the slash notation (/24) used to display
the LAN IP range on the website. Use the table below to translate the slash notation to the
subnet mask syntax.
d. Setting your PCs IP address:
Your router’s LAN IP has now been altered but your PC’s IP is
probably still in the old range
– thus making a connection impossible. Please make sure that
your PCs IP is updated to the new range, either by DHCP or setting it statically.
Once your PC’s IP is again within the same range as your router’s LAN IP, continue with the
following steps.
2. Setting up the VPN-Lite solution:
e. Telnet to the Pace 921VNX:
Please repeat step 1a but this time with the router’s new updated
LAN IP. Once you received the “ >” prompt, please continue with the next steps.
f. Running the script: The script below sets up the VPN-Lite service on your Pace 921VNX.
Please re-type or paste each of these commands into the telnet session that has been opened
to the router in step 2a above (while substituting the <angle brackets>).
