The Setup menus allow you to make settings to control how your set-top works. These are available
from your TV Guide and should be fully described in the information provided by your service
provider. There may also be on-screen information to explain these menus.
However, please note there are certain items and settings that may affect how your set-top and TV
work. See the table below for information about these.
Item
Setting
Options
Notes
Cable Box
Setup
AC Outlet
Switched,
Unswitched
If setting is “Switched”, the AC outlet on your set-top’s rear panel is
on
when your set-top
is
on
, and
off
when your set-top is
off
, so any TV that is therefore receiving its power from
this AC outlet will switch off when your set-top is turned off. If setting is “Unswitched”,
the AC outlet is
always on
, so any TV that is receiving its power from this AC outlet will
continue to receive power whether your set-top is switched on or off.
RF Bypass
Off, On
You must set this to “On” in order to use RF Bypass.
For information about RF Bypass, see page 17.
Configuration
Allows you to view the configuration of your set-top.
Audio
Default Audio
Track
Channel Default,
English, Espagñol,
Français, Português
Set the language track that your set-top first attempts to use when tuning to a channel.
“Channel Default” means your set-top will use the default audio track for the program.
Selecting a language means it will use the corresponding language track, if available.
Audio
Output
TV Speakers,
Stereo, Advanced
If you select “Advanced”, further settings are displayed, allowing you to set the Compression
(to None, Light or Heavy) and the Stereo Output (to Mono, Stereo or Matrix Stereo).
Screen position
This allows you to adjust how the picture displays in the TV screen.
Other items and options may be available on these screens. The menus may be subject to change in the future, as
your set-top advances with new technology.
USING THE SETUP MENUS