SMR System Manual, Rev A
PACE Inc, Southern Pines North Carolina
All rights reserved
www.paceworldwide.com
Page 7 of 8
d. The fuse in the front of the drawer (Towards the front of the SMR) is the active fuse. The fuse in
the back of the drawer (Towards the rear of the SMR) is a spare.
e. Test fuse with an ohm meter. It should be 0 (Zero) Ohms. If it is bad (Open or Infinity) replace it
with the spare and order part number 1159-0275-04-P5 for 120 Volt systems, and part number
1159-0275-01-P5 for 230 Volt systems
13. Service:
Please contact PACE or your local distributor for service and repair.
14. Warranty Information:
PACE WORLDWIDE LIMITED WARRANTY
Set up Steps are listed here include unpacking (if necessary), all required connections, and
energizing the system. In some cases, set-up menus/programming may be required.
PACE warrants to the first user that products manufactured by it and supplied hereunder are free of defects in
materials and workmanship for a period of one (1) year from the date of receipt by such user. This Warranty
as applied to blowers and motor pumps is limited to a period of one (1) year. Monitors, computers and other
brand equipment supplied, but not manufactured by PACE, are covered under their respective manufacturer’s
warranty in lieu of this Warranty.
This warranty does not cover wear and tear under normal use, repair or replacement required as a result of
misuse, improper application, mishandling or improper storage. Consumable items such as tips, heaters,
filters, etc., which wear out under normal use are excluded. Failure to perform recommended routine
maintenance, alterations or repairs made other than in accordance with PACE’s directions, or removal or
alteration of identification markings in any way will void this warranty. This warranty is available only to the
first user, but the exclusions and limitations herein apply to all persons and entities.
PACE MAKES NO OTHER WARRANTY, EXPRESS OR IMPLIED, AND MAKES NO WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
PACE will, at PACE’s option
, repair or replace any defective products at its facility or other location
approved by it at no charge to user, or provide parts without charge for installation by the user in the field at
user’s expense and risk. User will be responsible for all costs of shipping equipment to PACE or other
location for warranty service.
EXCEPT FOR THE REMEDY ABOVE DESCRIBED, UNLESS OTHERWISE REQUIRED BY APPLICABLE
LAW, PACE WILL HAVE NO OTHER OBLIGATION WITH REGARD TO ANY BREACH OF WARRANTY OR
OTHER CLAIM WITH RESPECT TO THE PRODUCTS, OR LIABILITY FOR ANY DIRECT, INDIRECT,
CONSEQUENTIAL, OR INCIDENTAL LOSS OR DAMAGE CAUSED BY OR OCCURRING IN
CONNECTION WITH ANY OF THE PRODUCTS.
Warranty service may be obtained by contacting the appropriate PACE Company or local Authorized PACE
distributor as set forth below to determine if return of any item is required, or if repairs can be made by the
user in the field.
Defective products may not be returned to PACE without a Service Authorization (“SA”) Number.
Any warranty or other claim with respect to the products must be made in writing delivered to PACE (or local
Authorized PACE distributor for Buyers outside the USA and the United Kingdom) within a reasonable time of
the expiration date of this warranty with sufficient evidence of purchase and date of receipt, otherwise user’s
rights under this warranty shall be deemed waived.
PACE, Incorporated retains the right to make changes to specifications contained herein at any time, without
notice.
