10
microprocessor controlled circuitry is recalibrating another aspect of the
system circuitry. “CAL” will now be
displayed indicating that calibration of
this channel is complete.
22. Press and release the Tip Temperature
Offset Key two times to exit calibration.
All values, features and defaults entered
during the calibration are now stored in
memory and all channel tip temperature
settings are turned “OFF”. All channel
Tip Temperature Offset settings are set to the default value of 6°F (3°C).
TEMPERATURE DISPLAY
MESSAGE CODES
Listed below are Message Codes and a
description of each which may be displayed on
the system power source digital readout during
the Calibration procedure.
Summary of Contents for MBT250
Page 12: ...12...
