background image

 

4

Introduction 
 

 

Solder Fume removal when hand soldering is an often-overlooked work place hazard.  Medical 
research has confirmed that there is an increase incidence of occupational asthma, chronic 
bronchitis, allergic reactions and other health related effects associated with exposure to 
solder/flux fumes in the electronics industry. 
 
The Arm-Evac   50  is  a  self-contained,  compact  and portable Benchtop filtering fume removal 
system.  The Arm-Evac 50 has Airflow Control and Filter Condition Monitoring to alert the 
operator when it is time to change the filter and incorporates a high performance 24vDC brush 
less/ maintenance free motor for years of trouble free use.   The Arm-Evac 50 has been designed 
to take up a minimum of bench space and incorporates a utility platform to stack soldering irons 
and hand tools etc.   
 
As standard the Arm-Evac 50 operates as a Self Contained Plenum.  The plenum type extraction 
provides fume removal for a wide capture area.  Should the fume capture require a more 
localized extraction, the Arm-Evac 50 can be configured to offer Arm-Extraction via an optional 
accessory.   The fumes are drawn from the point of origin through the Static-Safe system, filtered 
and returned to the work environment as clean air. 
 
In addition to offering two types of fume collection from a single unit, the Arm-Evac 50 also offers 
four levels of Fume Filtration, 1) A General Purpose Filter for normal Soldering applications, 2) A 
Clean room Filter for use in clean room environments and 3) An Adhesive Filter for removing 
fumes produced from light gluing applications

 

and 4) An Economy Foam filter for larger 

applications such as sanding, Benchtop machining & grinding. 

 
 
Specifications 
 

Arm-Evac 50 System Part Number 

 

 

 

8889-0050 

System 

voltage 

      120/230 

VAC, 

50/60Hz 

Flow Rate 

90cfm with std filter @ max 
motor speed 

 

45cfm with one Arm open 

 

30cfm with both Arms open 

Noise 

Level 

      54.5dbA 

at 

metres 

Weight 

       6kg 

(13lbs) 

Size H x W x D   

 

 

 

 

 

250 x 330 x 315mm 

 

 

 

 

 

 

 

(8.5” x 13” x 12.5”) 

Housing 

Steel chassis with ABS shell 
(static safe) 

Filter Monitoring 

LED display 

 

 
 

 
 

 
 
 
 

 

Summary of Contents for 8889-0050











Reviews: