©2018 PACE Inc., Vass, North Carolina, All Rights Reserved Page 1
General Information
Introduction
Thank you for purchasing the ADS200 Soldering System. This manual will provide you with the information
necessary to properly set up, operate, and maintain your system. Please read this manual thoroughly before
using the system.
The systems featured in this guide are available in either 115 VAC or 230 VAC versions. All of these models
incorporate AccuDrive® technology. The 230 VAC version systems bear the CE Conformity Marking, which
assures the user that it conforms to EMC 89/336/EEC. All models featured in this manual are lead free
compatible and comply with RoHS and WEEE directives.
These systems all meet or exceed the ANSI requirements for Soldered Electrical and Electronic Assemblies, J-
STD-001. Additionally they meet or exceed the requirements for electrostatic discharge set forth by ANSI/ESD
S20.20. Compliance with both of these standards is ensured by testing up to 50 MHz using the methodology
described in ANSI/ESD S13.1 2015.
Specifications
For 120V systems, 97-127 VAC at 50/60 Hz
Input Power Requirements
For 230V systems, 197-253 VAC at 50/60 Hz
Output Power
120 Watts Maximum Output
Dimensions
104 mm
H
x 130 mm
W
x 152 mm
D
4.1”
H
x 5.1”
W
X 6”
D
Weight
2.3 kg (5 lbs)
RoHS Compliant
Yes
Control Technology
AccuDrive®
Tip-to-Ground Resistance
2 Ohms or less
Temperature Accuracy
Meets or Exceeds ANSI/J-STD-001
Temperature Range
177-454°C (350-850°F)
Tips
AccuDrive® Blue Series Tip-Heater Cartridges
Soldering Iron
TD-200 AccuDrive®
Standard Tool Stand
Can hold up to 7 tips. Includes sponge in a stay-
moist well and brass wool tip cleaner.
Instant SetBack Tool Stand
Included with 8007-0579 and 8007-0581.
Available separately as item 6019-0089-P1
Refer to the Setup and Operation section page 5 for the feature settings set as default by the factory. There is
not a factory reset option for feature settings, changes must be made manually.
Temperature Specifications
AccuDrive® Blue Series Tip-Heater Cartridges connected to the ADS200 have a Tip Temperature Range of 177
to 454°C (350 to 850°F).
Digital Readout Resolution: ±5° (°C or °F)
Tip Temperature Stability: ±1.1°C (2°F) when idle.
Temperature Accuracy: Meets or exceeds ANSI/J-STD-001
EOS/ESD Specifications
Tip-To-Ground Resistance: Less than 2 ohms.
AC Leakage: Less than 2 Millivolts RMS from 50 Hz to 100 MHz.
Transient Level: Less than 500 mV peak, out to 100 MHz.
