PICO-200 Table Saw
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
▲
I
NSTRUCTION
M
ANUAL
3601 E. 34th St. Tucson, AZ 85713 USA Tel. +1-520-882-6598 Fax +1-520-882-6599 email: [email protected] Web: https://www.metallographic.com
6
Please read this instruction manual carefully and follow all installation, operating and safety guidelines.
3.0 Safety Guidelines
3.1 Warning Sign:
3.2 Safety Precautions
!
Careful attention to this instruction manual and the recommended safety
guidelines is essential for the safe operation of the PICO-200.
!
Proper operator training is required for operation of the PICO-200. Any
unauthorized mechanical or electrical modifications made to the PICO-200,
as well as improper operation, voids all warranty claims. All service issues
need to be reported to the manufacturer or supplier.
Operate unit as specified in this manual.
Disconnect from power before opening unit.
Do not leave tools inside cutting chamber.
Be mindful of fingers when closing the table and lid.
Extra precaution should be taken when magnetic stop is overridden.
Ensure all samples are securely held in place before cutting.
3.3 Emergency Statement
A large explanation point is used to point out special
safety features on the machine.
!
!
The PICO-200 table saw was designed for cutting metallographic specimens.
DO NOT CUT
oversized objects. Always follow proper operational guidelines
and avoid contact with moving parts, lubricants, and sharp edges. Seek
immediate medical care for cutting injuries.