Pace Technologies MEGA-T350A, Instruction Manual

Page: 18 / 61

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ▲
I
NSTRUCTION
M
ANUAL
MEGA - T350A
Abrasive Cutter
3601 E. 34th St. Tucson, AZ 85713 USA Tel. +1 - 520 - 882 - 6598 Fax +1 - 520 - 882 - 6599 email: pace@metallographic.com Web: https://www.metallographic.com
Please read this instruction manual carefully and follow all installation, operating and safety guidelines.
4.2.1 Control Panel Screen
START UP SCREEN
After turning on the main power switch
the START UP SCREEN will be
displayed.
Press the SELECTOR knob to
progress to the OPERATING SCREEN
To select the following parameters rotate the SELECTOR knob to
highlight the parameter and then press the knob. Adjust the
parameter by rotating the SELECTOR knob and press to accept
OPERATING SCREEN
Set Operating
Speed
Sets the
number of
serial cuts
Set Y - axis feed
rate
Set Depth of cut
in y - direction
Sets the width of a
serial cut (adds the
width of the blade
as chosen in
SETTINGS
Select FEED MODE as
constant or by Pulsing
based on parameters
set in SETTINGS
SETTINGS adjustments
for joystick Feed Rate,
PULSE cutting force
(amps), Overload
protection (amps)
4.2.2 Control Panel Screen - Parameter Adjustments
13