Pace Technologies FEMTO-1100S Instruction Manual Download Page 23

Page: 23 / 23

FEMTO-1100S Polishing Head

NSTRUCTION

ANUAL

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ▲

3601 E. 34th St. Tucson, AZ 85713 USA Tel. +1 520-882-6598 Fax +1 520-882-6599 email: [email protected] Web: https://www.metallographic.com

Please read this instruction manual carefully and follow all installation, operating and safety guidelines.

5.0 Maintenance

The FEMTO is a low maintenance machine. There are some checks that should be
done according to the following schedule:

Daily: Check the level of the pegs attached to the pistons on the rotating assembly.
If they are loose, tighten the locking nut with a 10mm wrench

Weekly: Clean the screen and cover with a wet cloth. Do not use chemicals on the
cover or screen as this can lead to damage

Summary of Contents for FEMTO-1100S
























Search results

Summary of Contents for FEMTO-1100S

Reviews:

Related manuals for FEMTO-1100S

Brands by name

Popular brands

Pace Technologies FEMTO-1100S, Instruction Manual

Search results

Summary of Contents for FEMTO-1100S

Reviews:

Related manuals for FEMTO-1100S

Brands by name

Popular brands