background image

Oil Level Indication on Dipstick

NOTE

On  the  engine  oil  dipstick,  the  differ-

ence  between  the  low  oil  level  mark

(2)  and  high  oil  level  mark  (1)  is  two

US quarts (1.9 liters).

Engine Oil Dip Stick Markings

1

2

1.

High oil level (1)

2.

Low oil level (2)

Topping Up the Engine Oil

If checking the engine oil just after stopping

the engine, wait 15 minutes for the oil to

drain back into the oil pan before checking

the fluid level.

This procedure should be followed when oil

level is low and more oil needs to be

added.

1.

Top up with oil, if necessary, via the

filler opening. Use the correct

grade in the correct quantity.

2.

After topping up, wait one minute

and check the oil level again.

3.

Reinstall the oil fill cap and twist to

lock it in place.

Engine Oil Filter

Always use quality engine lubricating oils in

conjunction with the appropriate oil drain

and filter change intervals. Refer to the

“Preventative Maintenance Schedule” for

the recommended oil and filter change

service interval.

CAUTION

Use of non-genuine PACCAR oil filters

can cause severe engine damage.

Oil Filter Removal Preparation

CAUTION

The oil change process must be com-

pleted, the engine restarted, and idled

for five minutes before beginning the

fuel filter change process. Failure to

comply could result in a non-warrantable

engine failure.

ENGINE MAINTENANCE - Maintenance Procedures

Y53-1185-1J1 (10/21)

57

2

Summary of Contents for PX-9


































































































Reviews: