manualshive.com logo in svg

Paccar MX-11, Operator'S Manual, Page: 51 / 121

Share
Download
Paccar MX-11 Operator'S Manual Download Page 51

Severe Duty/Vocational - 450,000 mi / 725,000 km / 13,500 hrs / 48 mo (4 yrs) 

27

Drive Belts

•

Refer to 

Poly V-belt and Fan Drive Belt Removal

 on page 89 - Replace for maintenance instructions.

Severe Duty/Vocational - 750,000
mi / 1,200,000 km / 24,000 hrs / 96 (8
yrs)

Severe Duty/Vocational - 750,000 mi / 1,200,000 km / 24,000 hrs / 96 (8 yrs) 

28

Cooling System

•

Refer to Change 

Extended Life Coolant

 on page 63 for maintenance instructions.

Pick-up/Delivery/Refuse

Pick-up/Delivery/Refuse - 15,000
mi / 24,000 km / 400 hrs / 6 mo

27

Ensure that all maintenance intervals leading up to this point are repeated during this interval prior to the completion of
those listed here.

28

Ensure that all maintenance intervals leading up to this point are repeated during this interval prior to the completion of
those listed here.

ENGINE MAINTENANCE - Pick-up/Delivery/Refuse

Y53-1166-1M1 (10/2020)

49

2

Summary of Contents for MX-11


























































































































Reviews:

No comments