manualshive.com logo in svg

Paccar DAF CHARGEMAX 90, User Manual, Page: 18 / 40

Share
Download
Paccar DAF CHARGEMAX 90 User Manual Download Page 18

•   Make sure that there is sufficient space around the EVSE to safely do maintenance and installation work.
•   Identify a site operator who is responsible for the safe operation of the EVSE and for the coordination 

of all work, if the owner does not do these tasks.

3.4  Personal protective equipment

Symbol

Description

Protective clothing

Safety gloves

Safety shoes

Safety glasses

3.5  Safety instructions for use

•   In the situations that follow, do not use the EVSE and immediately contact the manufacturer:
 

•   An enclosure has damage.

 

•   An EV charge cable or connector has damage.

 

•   Lightning struck the EVSE.

 

•   There was an accident or a fire at or near the EVSE.

 

•   Water has entered the EVSE.

3.6  Safety instructions during cleaning or maintenance

Preliminary requirements

•

  

•   Keep unauthorized personnel at a safe distance during cleaning or maintenance.
•   If for cleaning or maintenance it is necessary to remove safety devices, immediately install the safety 

devices after the work.

•   Put on the correct personal protective equipment. Refer to section 3.4.

3.7  Safety instructions for earthing

•   Make sure that the EVSE is connected to an earthed, metal, permanent electrical system. 

Alternatively, install an equipment-earthing conductor with circuit conductors. Connect this earthing 
conductor to an equipment-earthing terminal or lead on battery charger.

•   Make sure that the connections to the EVSE comply with all applicable local rules.

18

Summary of Contents for DAF CHARGEMAX 90









































Reviews:

No comments