10
RECOMMENDED OIL
We have published the following specifi cation to help determine which lubricant is best suited to your application.
The oil must possess high temperature oxidation stability, rust and corrosion protection, good dispersant and detergent
characteristics, anti-wear additives and remain compatible with nitrile base seals.
Your lubricant supplier should assure you that his product meets this specifi cation. If there is any doubt as to the suit-
ability of a lubricant, contact the PACCAR Winch Service Department, providing a copy of the product specifi cations.
o
F -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110
o
F
o
C
-40 -35 -30 -25 -20 -15 -10 -5 0 5 10 15 20 25 30 35 40
o
C
o
F -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110
o
F
o
C
-40 -35 -30 -25 -20 -15 -10 -5 0 5 10 15 20 25 30 35 40
o
C
Prevailing Ambient Temperature
! WARNING !
Cold start-up in this ambient temperature range requires extended
equipment warm-up to prevent erratic clutch and brake operation
which may result in property damage, injury or death.
! WARNING !
Cold start-up in this ambient temperature range requires extended
equipment warm-up to prevent erratic clutch and brake operation
which may result in property damage, injury or death.
A - HTF Type C3/C4 SAE 30, CAT TO4 SAE30
B - CAT TO4 SAE 10W30
C - HTF Type C4/C4 SAE 10, CAT TO4 SAE 10W
D - CAT TO4 SAE 5W20 spc.
Basic Oil Requirements
15,000 SUS maximum allowed viscosity at cold start-up; requires extended equipment warm-up.
3,000 SUS maximum allowed viscosity at cold start-up; requires normal equipment warm-up.
60 SUS minimum allowed viscosity at maximum winch operating temperature assuming ambient
plus 80
o
F (27
o
C).
Oil must possess high temperature oxidation stability, rust and corrosion protection, good dispersant
and detergent characteristics, anti-wear additives and remain compatible with nitrile base seals.
A
B
C
D