Pacbrake 10470 Installation Manual Download Page 13

Single Channel Wireless Air Spring Controls

L6557

13

DISCLAIMER

Driving while distracted can result in loss of vehicle control that may lead to an accident, severe personal injury, or death. 

The driver’s primary responsibility is in the safe and legal operation of a vehicle, and use of any handheld devices, other 
equipment, or vehicle systems which take the driver’s eyes, attention and focus away from the safe operation of a vehicle or 
which are not permissible by law should never be used during operation of the vehicle.

LEGAL

•  Apple, the Apple logo, iPhone, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. 

App Store is a service mark of Apple Inc., registered in the U.S. and other countries. 

•  Google Play and the Google Play logo are trademarks of Google LLC 
•  Android is a trademark of Google LLC 
•  The Android robot is reproduced or modified from work created and shared by Google and used according to terms 

described in the Creative Commons 3.0 Attribution License.

FCC REGULATORY APPROVAL

Contains Transmitter Module FCC ID: A8TBM70ABCDEFGH 

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC 
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. 
This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the 
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will 
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which 
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or 
more of the following measures: 

•  Reorient or relocate the receiving antenna. 
•  Increase the separation between the equipment and receiver. 
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the 

dealer or an experienced radio/TV technician for help.

IC REGULATORY APPROVAL

Contains transmitter module IC: 12246A-BM70BLES1F2

 

This device complies with Industry Canada license-exempt  
RSS standard(s). 

Operation is subject to the following two conditions:  

1)

  This device may not cause interference, and 

2)

  This device must accept any interference, including 

interference that may cause undesired operation of the 
device. 

APPROBATION RÉGLEMENTAIRE IC 

Contient le module émetteur IC: 12246A-BM70BLES1F2

Le présent appareil est conforme aux CNR d’Industrie 
Canada applicables aux appareils radio exempts de licence.

L’exploitation est autorisée aux deux conditions suivantes: 

1)

  l’appareil ne doit pas produire de brouillage, et 

2)

  l’utilisateur de l’appareil doit accepter tout brouillage 

radioélectrique subi, même si le brouillage est 
susceptible d’en compromettre le fonctionnement.

Summary of Contents for 10470














Reviews: