PAC RP5-GM11 Manual Download Page 1

Pacific Accessory Corporation

Radio Replacement & Steering Wheel Control Interface 

with OnStar Retention for General Motors Vehicles

RP5-GM11

Rev. 092117

Page 1

© 2017 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.

PAC-audio.com

Introduction & Features

Important Notes

Wiring Connection Chart

Illustration / Schematic

The RP5-GM11 interface allows the replacement of a factory radio in select General Motors vehicles with Class II radios.  

Using this interface will retain factory features such as OnStar, steering wheel controls (SWC), warning chimes, Rear 

Seat Controls (RSC), Rear Seat Entertainment (RSE) and the BOSE amplifier when the original radio is removed. The 

RP5-GM11 also provides data bus driven outputs such as retained accessory power (RAP), vehicle speed sensor (VSS), 

illumination, reverse trigger and parking brake.

1. The radio select rotary switch on the side of the interface must be adjusted to the proper radio setting before plugging the 

interface into the vehicle (see next page for setting chart).

2. The interface comes pre-programmed for all of the vehicles factory SWC functions and does not require programming unless 

you wish to re-assign the SWC functions to different buttons. The SWC can always be restored to default settings by pressing 

and releasing the program button on the side of the interface once and waiting 7 seconds for the LED to flash 3 times. 

PLEASE 

NOTE: Due to the many different possible OEM SWC configurations, some applications may need to be reprogrammed 

for the SWC assignments to make sense. Whatever you assign as aftermarket volume commands will also be the 

OnStar volume commands.

3. 

 The aftermarket radio must have an auxiliary input in order for the factory RSE audio to be retained through the cabin speakers.

4. RSC buttons that are identical to the SWC will mimic the SWC one for one.
5. 

The LED will flash whenever a SWC button is pressed.

SWC Connection

See above chart for 
different radio type 
connections

x3

Wiring

SWC Connection

Aftermarket 

Radio 

Connections

Vehicle 

Connections

Pacific Accessory Corporation

Light Green

Parking Brake Output (-)

Pink

Vehicle Speed Output 

Blue

Not Used

Blue / White

Amp Turn On Input

Orange / White

Illumination Output (+)

Purple / White

Reverse Output (+)

Brown Loop

Mute Loop - See 

installation note 6.

 Aftermarket Radio Connections

Yellow

+12v

Black

Ground

Red

Acc. Output

White

Front Left + input

White / Black

Front Left - input

Grey

Front Right + input

Grey / Black

Front Right - input

Green

Rear Left + input

Green / Black

Rear Left - input

Purple

Rear Right + input

Purple / Black

Rear Right - input

SWC Connector

Blue/Yellow

Kenwood, Newer JVC

3.5mm Jack

Alpine, JVC, Clarion, 

Pioneer, Sony, Fusion, 

Boyo, Dual, Lightning Audio, 

Visteon or Advent

Reviews: