INSTALLATION AND OPERATION MANUAL
PAC HEAT RECOVERY WATER HEATER
Page
2
PAU model
PAS model
Figure 1 :
PAC Heat Recovery Water heater PAU and PAS Model.
PAC Heat Recovery Water Heater of all models can operate in normal pressure 100
PSI, As the refrigerant integrated solution for creating heat to work at normal pressure as
250-300 PSI. By testing the ability of the pressure 150 PSI for water pressure and 600 PSI
circuit solution.
In order to back up heat or in the absence of air conditioning systems for long time or
the use of air conditioners in small quantities. The placement of this element for store up
water heater.
PAC Heat Recovery Water Heater for all models are access points to support the
electric Heater where the tank bottom when placed vertically.
The outer jacket of PAC Heat Recovery Water heater :-
-
PAU model are made of powder coated steel 304 which it is high corrosion
resistance, non corrosive in case of install in the sea area.
-
PAS model are made of a spray paint steel. It should not to clean with the
cleaning equipment or liquid mixture which it damage to the surface of tank, all
for protect the corrosion.
Figure 2 : The bracket of PAU and PAS model.
