© 2020 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
PAC-Audio.com
Pacific Accessory Corporation
Page 6
Rev: V1
Date: 091120
Advanced Subwoofer Amplifier Interface
for Select Chrysler / Dodge / Jeep Vehicles
APSUB-CH41
Troubleshooting
Technical Support
1.
Low volume setting on radio is too loud - Set the minimum volume using process outlined in Setup and Configuration, or using
the AmpPRO PC app.
2. I
f for any reason the APSUB module becomes unresponsive, or will not power up with the key on, you can reset the
interface
by turning the key to the ignition position, then pressing and holding the Volume Down button on the factory steering wheel
controls for 12 seconds until a tone is heard or by pressing and holding the reset button on the side of the APSUB module for
10 seconds (until the LEDs alternate flashing red).
LED Legend
LED 1
Action/Color
During Normal Operation
Solid Red
Module Active
Solid Amber
Minimum Volume Adjustment Mode
Rapid Blink Any Color
DSP Activity
LED 2
Blinking Amber
USB Connection Detected
Both LEDs
Alternate Blinking Red
Performing Memory Reset
Email:
support@PAC-audio.com
Phone:
727-592-5991
Chat:
PAC-Audio.com