UMA
pg. 12
LIGHT AND AUDIO FUNCTION TROUBLESHOOTING GUIDE
IF YOU HAVE DIFFICULTY PROPERLY OPERATING UMA, FOLLOW THIS GUIDE
PROBLEM
BLUETOOTH
AUDIO
CONNECTION IS
DISTORTED OR
DROPPING OUT
3.5MM AUXILLIARY
AUDIO CONNECTION IS
DISTORTED OR
DROPPING OUT
STREAMED AUDIO
CONTENT IS DISTORTED
OR DROPPING OUT
UMA POWER IS ON,
LANTERN DOES NOT
ILLUMINATE
INTERNET CONNECTIVITY ISSUES
FOLLOW YOUR ROUTER/ISP INSTRUCTIONS
TO ENSURE YOUR INTERNET CONNECTION
IS FUNTIONING PROPERLY
DIMMER CONTROL RING IS TURNED OFF
ENSURE DIMMER CONTROL RING IS
TURNED CLOCKWISE PAST THE ‘CLICK’ TO
ILLUMINATE
ADJUST THE VOLUME ON BOTH UMA AND
THE AUDIO SOURCE
RE-PAIR YOUR DEVICE WITH UMA
RESTART BOTH THE AUDIO SOURCE AND UMA
DISCONNECT OR POWER OFF THE OTHER
BLUETOOTH
DEVICE
TRY A DIFFERENT 3.5MM AUXILLIARY CABLE
TRY A DIFFERENT SOUCE DEVICE TO ENSURE
THE ISSUE ISN’T THE SOURCE DEVICE
CHECK THAT THE 3.5MM AUXILLIARY CABLE
IS SECURELY CONNECTED TO BOTH UMA
AND THE SOURCE DEVICE
MOVE UMA AWAY FROM ANY DEVICE THAT
EMITS RF SIGNALS OR INTERFERENCE
MOVE THE AUDIO SOURCE CLOSER.
MAXIMUM DISTANCE FROM DEVICE IS 10M
SOLUTION
THE VOLUME ON EITHER THE AUDIO
SOURCE OR UMA IS TOO LOW
BLUETOOTH PAIRING FAILED
POOR CONNECTION BETWEEN UMA AND
THE SOURCE DEVICE
SOURCE DEVICE IS PAIRED TO A
DIFFERENT BLUETOOTH DEVICE
3.5MM AUXILLIARY CABLE IS FAULTY OR
DAMAGED
SOURCE DEVICE ISN’T WORKING
PROPERLY
3.5MM AUXILLIARY CABLE IS NOT FULLY
CONNECTED TO EITHER UMA OR THE
SOURCE DEVICE
THERE IS A DEVICE (MICROWAVE, WIRE-
LESS LAN, ETC.) THAT OUTPUTS SIGNALS
IN THE 2.4 GHz FREQUENCY BAND NEARBY
THE SOURCE DEVICE IS TOO FAR AWAY
FROM UMA
CAUSE
