CIRCA PENDANT
pg. 19
1
CIRCA PENDANT
ASSEMBLY INSTRUCTIONS
2
3
NOTE: IF JUNCTION BOX IS NOT LOCATED IN THE DESIRED
POSITION FOR CIRCA PENDANT, SEE BACK PAGE FOR SWAG
MOUNT INSTALLATION
IMPORTANT: WE RECOMMEND FIXTURE BE INSTALLED BY AN ELECTRICIAN
ADD 3
INCHES
(7.6 CM)
FOR
WIRING
BEFORE CUTTING, WRAP CORD
WITH ELECTRICAL TAPE TO PREVENT
THE FABRIC SLEEVE FROM FRAYING
USE FLAT HEAD
SCREWDRIVER
TO SET STRAIN
RELIEF
ROUTE BUILDING WIRING THROUGH MOUNTING
PLATE, THEN ATTACH PLATE TO JUNCTION BOX
CUT FIXTURE CORD TO DESIRED LENGTH, ADDING
AN ADDITIONAL 3 INCHES (7.6 CM) FOR WIRING
ROUTE FIXTURE AND BUILDING CORDS AS SHOWN,
THEN PULL CIRCA PENDANT TO DESIRED HEIGHT
AND SET STRAIN RELIEF
