- 5 -
Microphone Connection
Mic1~5 inputs are balanced standard XLR Jack , rear panel.
Mic1 input has VOX priority which will override Channel 3~6 and Line input signals but
NOT the Channel 2 input.
Line (Aux/CD) Connection
The equipment provides an auxiliary input which may be used for connecting other signal
sources such as a Radio Tuner, CD or Cassette player. A slide switch is located on the read panel
for selection of, Mic3
→
Tel, Mic4
→
Aux4, Mic5
→
Aux5.
The line level Control operates on each of the input sources.
To operate select the desired music source using the slide switch and turn the “Channel” control
clockwise to increase the volume or anticlockwise to reduce the volume.
The Aux / input sockets are standard stereo RCA Jack phono, single sockets are supplied and
these are
linked together internally, this allows stereo signal source to be used without the need to obtain
a special lead, however you may wish to check with the manufacturer of the signal source to
ensure that no damage will result if the left and right output channels are put in parallel.
RCA Phono plug connections
Sleeve-Screen
SLEEVE
PIN
Pin- Signal
Tape output Connection
These standard RCA stereo Jack phono sockets provide a mixed output suitable for connection to
a tape or Cassette recorder.
