p5 FutureNow FNIP-6x2AD, Installation And Operation Manual

Page: 24 / 26

24 | P a g e
Operation via TCP
To achieve the easiest integration with most controllers used in home and
commercial applications, the module can be controlled by raw TCP protocol using
simple ASCII based commands.
The TCP Communication Protocol Description is available upon request.
Event notifications
There are automatic event notifications sent to clients via the open socket
connections whenever the status of an input or output changes.
The TCP/IP communication can be enabled/disabled via the Network settings page.
Most third-party automation controllers that can implement the simple
communication protocol of the FNIP-6x2AD and they are able to control the
FutureNow FNIP-6x2AD. The following are the most widely used:
 AMX
 Control4
 Crestron
 RTI
 Savant
 Extron
 DemoPad
Software modules/plug-ins for the above controllers are available or P5 will provide
full assistance in creating them.
Android and iOS applications are also available.