P3 International P4900 Operation Manual Download Page 12

P3 INTERNATIONAL CORPORATION LIMITED WARRANTY

P3 INTERNATIONAL CORPORATION ("P3") warrants to the original retail 
purchaser only, that its product is free from defects in material or 
workmanship under the condition of normal use and service for a period of 
six (6) months from the date of purchase.  In the event that a defect, 
malfunction or failure occurs or is discovered during the warranty period, P3 
will repair or replace at its option the product or component part(s) which 
shall appear in the reasonable judgment of P3 to be defective or not to 
factory specifications.  A product requiring service is to be returned to P3 
along with the sales receipt or other proof of purchase acceptable to P3 and 
a statement describing the defect or malfunction.  All transportation costs 
shall be borne by the owner and the risk of loss shall be upon the party 
initiating the transportation.  All items repaired or replaced thereunder shall 
be subjected to the same limited warranty for a period of six (6) months from 
the day P3 ships the repaired or replaced product.  The warranty does not 
apply to any product that has been subject to misuse, tampering, neglect, or 
accident or as a result of unauthorized alterations or repairs to the product.  
This warranty is void if the serial number (if any) has been removed, altered, 
or defaced.  This warranty is in lieu of all warranties expressed or implied, 
including the implied warranties of merchantability and fitness for a 
particular purpose which are expressly excluded or disclaimed.  P3 shall not 
be responsible for consequential, incidental or other damages, and P3 
expressly excludes and disclaims liability for any damages resulting from 
the use, operation, improper application, malfunction or defeat of any P3 
product covered by this limited warranty. P3's obligation is strictly and 
exclusively limited to the replacement or repair of any defective product or 
component part(s).  Some states do not allow the exclusion or limitation of 
incidental or consequential damages, so the above limitation or exclusion 
may not apply to you.  P3 does not assume or authorize anyone to assume 
for it any other obligation whatsoever.  Some states do not allow limitation 
on how long an implied warranty lasts, so the above limitations may not 
apply to you. It is the owner/user's responsibility to comply with local, state, 
or federal regulations, if any, that may pertain to P3 products or their use.  
This warranty gives you specific legal rights, and you may also have other 
rights which vary from state to state.

If you experience difficulty in the operation of your unit, or if your unit 
requires repair please contact:

P3 INTERNATIONAL CORPORATION
TECHNICAL SUPPORT

Tel: 212-741-7289

Fax: 212-741-2288

Email: [email protected]

Summary of Contents for P4900














Reviews: